SPECIFICATIONS

51mm/57mm/63mm/76mm Electric Exhaust Muffler Valve Cutout System Dump Wireless Remote,Increase Engine Output and Efficiency.

Description:

The exhaust port is the opening in the exhaust system between the head and the muffler. 

This opening is usually covered and directs all of the vehicle's exhaust through the muffler and out the tailpipe. 

This set of electric exhaust cutout valve is suitable for most 2/2.25/2.5/3inch exhaust systems. 

Feature:

1.Application: This set of electric exhaust cutout valve is suitable for most 2/2.25/2.5/3inch exhaust systems (The voltage over 12V will cause the wire to become hot or even burnt.) 

2.Material: The pipeline is made of high-quality stainless steel, controlled by computer. Mandrel-Bends for strength and durability. 

3.High Performance: Double valve exhaust design, easy to control the exhaust air volume and air volume, to achieve high performance. 

4.Control: DC connection line is used to make the link more stable. If the remote is damaged, the control box program can be matched with other remotes. 

5.Installation: They can be placed anywhere after the header. To open the cutout, you press the switch, which opens the cutout, releasing your exhaust. This way you can bypass the muffler, increase the horsepower and give your car an extremely hoarse rumble. 

Specification: 

Tube Diameter: 2/2.25/2.5/3inch

Material: Stainless Steel 

Color: Silver 

Voltage: 12V 

Heater Power: 2KW 

Rated Power: 30W 

Fuel Consumption: 0.09-0.4L/H

Package Included: 

1 x Electric exhaust cut out 

1 x Y-shape tube 

1 x Wireless Remote 

1 x Wire Harness 

1 x 60° outlet pipe 

1 x Motor 

1 x Clamp 

3 x Nuts 

6 x Gaskets 

1 x Aluminum V-band jig 

1 x Manual 

Note: 

1. Please check the size of the electric exhaust valve carefully to ensure that the exhaust valve of the vehicle is suitable. 

2. This is a DIY kit, remember you need to solder to the exhaust valve yourself or go to a repair shop. 

3. To avoid motor blockage, please do not press the button for a long time. Frequent clogging will affect the service life of the motor gear. It only takes 2-3 seconds to fully open or fully close. 

4. There is a necessary condition for the motor to work: the starting current must reach 0.5A (the continuous current of the power battery must not be lower than 0.5A, if there are 2 sets of exhaust valves, 1 to 2 sets, the starting current is 3A.